Arabic Consultancy Center for Engineering Materials, Inspection and Welding
Contact:
Dr. Waleed Khalifa
#24, street 159, Etihad Square
Maadi, Cairo Egypt
Maadi, Cairo Egypt
Phone:
+ (2) 0109 8163 293
Fax:
+ (2) 022 3592 231
Email:
accmiw@ymail.com
Tags:
NDT and inspection, and training services,
Keywords:
inspection, welding, materials, NDT, manufacturing consultations
The Arabic Consultancy Center for Engineering Materials, Inspection and Welding (ACCMIW) is a company located in Egypt, with business focus on engineering materials consultations, failure analysis and prevention, quality control, inspection, NDT and welding.
The topics of interest are:
Consultations:
Engineering Materials: metallurgical and failure analysis investigations, mechanical testes, chemical analysis, conformance to specifications, manufacturing consultations, heat treatments, protection, materials selection.
Services:
Inspection and Welding: Services of Engineering failure analysis and metallurgical investigations, Visual inspection; ultrasonic, radiographic, magnetic particle and liquid penetrant inspection; eddy current testing; coating inspection and thickness measurements; ferrite number measurements; microstructure studies; welding procedure specification and qualification; welding repairs; welder training and qualification.
In-situ replica microstructure services (Field Replication Metallography) in cairo-Egypt. ACCMIW provides a professional in-situ replica services for investigating component microstructure and determination of damage causes.
Boiler inspection: ACCMIW provides in-service boiler inspection services according to the National Board System. Dr Khalifa is a Pressure Equipment Inspector PEI with he National Board of Boilers and Pressure Vessel Inspectors.
Training:
Engineering Materials Programs
1- corrosion and material protection
2- materials selection
3- mechanical testing and quality control
4- oil field materials
5- failure analysis: methodology and procedure
6- refractories design, installation, inspection and repair
7- preparation for the API 936 examination
8- Steel metallurgy for non-metallurgists
10- metallurgy for non-metallurgists
11- Metallorgaphy techniques and basic skills
Welding and Inspection Programs
1- introduction to welding inspection and metallurgy
2- principles of welding technology
3- welding metallurgy
4- welding of carbon and low alloy steels
5- welding of boiler steels
6- welding of stainless steels
7- levels I and II of radiographic testing (RT)
8- levels I and II of ultrasonic testing (UT)
9- levels I and II of liquid penetrant testing (PT)
10- levels I and II of magnetc particle testing (MT)
11- levels I and II of visual testing (VT)
12- levels I and II of eddy current testing (ET)
13- training course for the preparation of certified welding inspector AWS-CWI examination
14- training course for the preparation of certified welding engineer AWS-CWEng examination
15- training course for the preparation of TWI-CSWIP 3.1 examination
16- training course for the preparation of API certified piping inspector examination (API 570)
17- training course for the preparation of API certified pressure vessel inspector examination (API 510)
18- training course for the preparation of API certified storage tank inspector examination(API 653)
19- training course for the preparation of API risk based inspection examination(API 580)
20- training course for the preparation of API welding inspection and metallurgy examination(API 577)
21- training course for the preparation of API damage mechanisms in refining and petrochemical industries examination(API 571)
22- understanding code ASME IX, welding
23- understanding code ASME B31.3 process piping
24- understanding code ASME B31.1 power piping
25- understanding code AWS D1.1 structural steel welding
25- understanding code API 1104 welding of pipelines
26- training course for the fitness for service (API 579)
Other course may be available upon request.
Contact Information:
Dr. Waleed Khalifa
#24, street 159, Etihad Square, Maadi, Cairo, Egypt
Telefax: +(2) 022 3592 231
Cell. Phone: +(2) 0109 8163 293
E-mail: accmiw@ymail.com
http://facebook.com/ACCMIW
https://schools.aws.org/school?mv_arg=14134
The topics of interest are:
Consultations:
Engineering Materials: metallurgical and failure analysis investigations, mechanical testes, chemical analysis, conformance to specifications, manufacturing consultations, heat treatments, protection, materials selection.
Services:
Inspection and Welding: Services of Engineering failure analysis and metallurgical investigations, Visual inspection; ultrasonic, radiographic, magnetic particle and liquid penetrant inspection; eddy current testing; coating inspection and thickness measurements; ferrite number measurements; microstructure studies; welding procedure specification and qualification; welding repairs; welder training and qualification.
In-situ replica microstructure services (Field Replication Metallography) in cairo-Egypt. ACCMIW provides a professional in-situ replica services for investigating component microstructure and determination of damage causes.
Boiler inspection: ACCMIW provides in-service boiler inspection services according to the National Board System. Dr Khalifa is a Pressure Equipment Inspector PEI with he National Board of Boilers and Pressure Vessel Inspectors.
Training:
Engineering Materials Programs
1- corrosion and material protection
2- materials selection
3- mechanical testing and quality control
4- oil field materials
5- failure analysis: methodology and procedure
6- refractories design, installation, inspection and repair
7- preparation for the API 936 examination
8- Steel metallurgy for non-metallurgists
10- metallurgy for non-metallurgists
11- Metallorgaphy techniques and basic skills
Welding and Inspection Programs
1- introduction to welding inspection and metallurgy
2- principles of welding technology
3- welding metallurgy
4- welding of carbon and low alloy steels
5- welding of boiler steels
6- welding of stainless steels
7- levels I and II of radiographic testing (RT)
8- levels I and II of ultrasonic testing (UT)
9- levels I and II of liquid penetrant testing (PT)
10- levels I and II of magnetc particle testing (MT)
11- levels I and II of visual testing (VT)
12- levels I and II of eddy current testing (ET)
13- training course for the preparation of certified welding inspector AWS-CWI examination
14- training course for the preparation of certified welding engineer AWS-CWEng examination
15- training course for the preparation of TWI-CSWIP 3.1 examination
16- training course for the preparation of API certified piping inspector examination (API 570)
17- training course for the preparation of API certified pressure vessel inspector examination (API 510)
18- training course for the preparation of API certified storage tank inspector examination(API 653)
19- training course for the preparation of API risk based inspection examination(API 580)
20- training course for the preparation of API welding inspection and metallurgy examination(API 577)
21- training course for the preparation of API damage mechanisms in refining and petrochemical industries examination(API 571)
22- understanding code ASME IX, welding
23- understanding code ASME B31.3 process piping
24- understanding code ASME B31.1 power piping
25- understanding code AWS D1.1 structural steel welding
25- understanding code API 1104 welding of pipelines
26- training course for the fitness for service (API 579)
Other course may be available upon request.
Contact Information:
Dr. Waleed Khalifa
#24, street 159, Etihad Square, Maadi, Cairo, Egypt
Telefax: +(2) 022 3592 231
Cell. Phone: +(2) 0109 8163 293
E-mail: accmiw@ymail.com
http://facebook.com/ACCMIW
https://schools.aws.org/school?mv_arg=14134
We provide expert level in all our services:
* Metallurgical and failure analysis consultations
* NDT and Welding inspection
* Boiler in-service inspections
* Replica services (in-situ metallography)
* International level of training programs
* Manufacturing consultations
* Professionally follow-up
* Metallurgical and failure analysis consultations
* NDT and Welding inspection
* Boiler in-service inspections
* Replica services (in-situ metallography)
* International level of training programs
* Manufacturing consultations
* Professionally follow-up
