Nondestructive Testing - MT, PT, UTT, VT & PMI
API 510 - Pressure Vessel Inspector
API 570 - Piping Inspector
API 653 - Aboveground Storage Tank Inspector
PMP - Project Management Professional

Bachelor of Science - Civil Engineering

PROFESSIONAL SUMMARY
Asset Integrity Inspector with performing daily inspections, obtaining measurements and conducting tests on diverse materials. As an API inspector (API 510 and API 570) dedicated, dependable and focused on making positive impact with careful work. Highly organized with sound judgment, analytical problem-solving skills and decisive nature. Strong management and organizational skills that I have acquired throughout my professional career. Through my career I have taken pride in being a proven self-motivated, fast learner. Proficient in all forms of Microsoft office, as well as in Risk Based Inspection implementation and maintenance experience A basic knowledge of creating vessel and isometric drawings. Routine and turnaround integrity visual inspection and non-destructive examinations planning, scheduling and execution. Thorough knowledge of ASME B31.3 and Sec. VIII. Skilled in vessel and piping fabrication at all phases. 7 years' experience in maintenance and turnaround planning Extensive knowledge of Process Safety Management (PSM).

WORK HISTORY
Sentinel Integrity Solutions: API 510/570 Inspector – Marathon, Grayville, LA 01/24 – Present
• Perform an internal and external inspection on fixed equipment at scheduled intervals to maintain the integrity of the equipment. Providing the highest level of quality measures in the following levels of operations:
• Performed external visual inspection on process piping to determine serviceability of the ISBL piping system.
• Internal and external visual inspection of heat exchanger shell, tube bundles, floating head, channel and channel cover.
• Recommended repairs when needed and followed up to ensure the integrity of the equipment is maintained.
• Witnessed hydro testing and verified all specification of NDE procedure on the job.
• Harmonized isometric drawings, P&ID's and specifications prior to construction and through final completion of turnover packages.
• Performed API 570 and CUI inspections on piping circuits per API 570 recommended practice.
• Maintained and organized all records associated with inspection tasks and quality engineering.


Acuren: API 510/570 Inspector – PBF Energy, Torrance, CA 08/23 – 12/23
• A visual assessment on Phase 1 Assessment Piping Inspection was initially conducted to determine the need for services of the OSBL piping system.
• Performed inspections based on the applicable code, recorded findings, and recommend repairs
• Performed visual inspection on the external and internal section of equipment such as the shell, heads, welds, and all internal components and ensured the integrity of the equipment is maintained.
• Organized and reported test results across the different inspection tools, ITP’s and services offered within the Integrity Services Division.
• Conducted periodic checks on existing inspection equipment for safety, reliability, continued operation, and efficiency.

Amerapex Corporation: API 510/570 Inspector – Phillips 66, Ferndale, WA 10/22 – 06/23
• Inspect furnaces equipment internally and externally as per Inspection Scopes, generated reports based upon inspection findings, monitored the repair work, and completed final sign-off of reports.
• Inspect Pressure Safety Valve after installation and compile required documentation to ensure Pressure Safety Valve met code requirements.
• Apply a sharp eye for detail toward approving inspection and test plans (ITPs) based on scope of work.
• Supervise efforts of subcontractors, prepare repair requests, and submit quality surveillance reports to verify compliance with established requirements. `
• Performed final walk-down on piping systems, generated punch list for required work, witnessed hydro test, verified completion of punch list items, and performed final checks on systems prior to turnover to client.


Stronghold: API 501/570 Inspector – Valero, Corpus Christi, TX 11/21 – 09/22
• Pressure vessel and piping inspections of inside section of the Shell, clad & strip lined section of shell, Sieve and bubble cap trays etc.
• Inspection of the following: Process Piping, Power Piping & Boiler Inspection, Furnace, Vessels, Heat Exchangers, CUI Inspection, etc. (In-service and shut down).
• Performed internal and external inspection on fixed equipment at shutdowns and scheduled intervals to maintain the mechanical integrity.
• Verified material conformity and signed off acceptance of loading and installations tests on mechanical, rotating, structural and piping equipment
• Recommended repair with a good repair plan and signed off hydrostatic testing as needed after repair.



Team Industrial Services, Alvin, TX 2018 – 2021
NDT Technician (ASNT SNT TC 1A Level II: MT, PT, &UT)
• Maintenance detailed inspection records in accordance with applicable procedures, including acceptance and/or rejection of client specifications.
• Performed MT, PT, UTT, internally and externally in vessels, drums, and towers throughout various units.
• Conducted UT thickness for unit completions, overdue, along with accurately filling out detailed nozzle load sheets.
• Isometric field sketching of various pieces of equipment and piping confirming accurate components; fitting, flanges, valves etc.
• Walking down P&ID's, red lining and revising existing drawings throughout various units.
• Perform PMI on materials to ascertain its content.


Petrochem Inspection Services, Channelview, TX 2016 – 2017
NDT Technician (ASNT SNT TC 1A Level II: MT, PT, &UT)
• NDE Services for the hydrogen and hydrocracker units.
• Conduct routine corrosion monitoring data collection utilizing 38DL UT Meter.
• Operation, setup, calibration, and maintenance of associated equipment.
• Walk down piping circuits, draw ISOs, and read P&ID's
• Responsible for inspection of pipes and welds to ensure material composition was correct.
• Assist API staff with inspections on vessels and heat exchangers.


Weld Spec, Lumberton, TX 2015 – 2016
NDT Technician (ASNT SNT TC 1A Level II: MT, PT & UT)
• Perform visual inspection of weld and pipe system, NDT and interpretation of result besides verifying the conformance of dimensions.
• Calibrate equipment and perform PMI on materials to ascertain its content.
• Inspects materials using various NDT methods: MT, PT, UT Thickness, and tube inspection.
• Climbing and working at high elevations and working in confined spaces.
• Establish techniques for proper examination of objects under inspection for safety regulations.
• Prepare daily inspection reports.


Amerapex Corporation, Houston, TX 2012 – 2014
NDT Technician (ASNT SNT TC 1A Level II: MT, PT & UT)
• Ultrasonic, Liquid Penetrant and Magnetic Particle Testing of Vessels, Boiler, Heat Exchangers,
• Flare Drums, Cyclones, Regenerators, and pipelines.
• Functional as UT gauging Inspector for doing corrosion survey of machine vessels according to classification rules.
• Scanning and visual inspection as required and compare with the previous document to note corrosion level, highlighting and submit their shops and Inspection & Audit of QP Mechanical contractors.
• Assist with the Radiography of tanks, Vessels, Pressure parts, prefabricated weld joint of pipes using gamma ray.
• Responsible for Interpreting drawings and NDT symbols
• Preparation and submission of reports & Co-ordination with clients


Schlumberger, Houston, TX 2007 – 2011
Quality Control Inspector
• • Perform quality work checks to ensure the product meets quality standards in accordance with ASME and National Board Certifications
• Conduct visual inspection of labels applied to maintain traceability, verify the printed content on the label contains the required information (part number, serial number, etc.).
• Verify the presence and location of required devices, according to the applicable product documentation (drawing, assembly procedures, bill of material, etc.).
• Process devices reject, mark the locations of observe defects followed by identifying and segregate nonconforming device.
• Generally, ensure inspection processes are performed in compliance with Good Document Practice (GDP), Good Manufacturing Process (GMP) and Standard Operation Procedure (SOP).
• Work closely with Quality Engineering to establish a communication and collective understanding of what may be acceptable.

References available upon request.

I am hard working and good at working with little or no supervision,can work well under pressure and deadlines,readily available for change of environment under a short notice.