API 510/570/653 Inspector
NDT.org Member Since: 2022
Added: 5/21/2022
Last Updated: 5/21/2022
Last Updated: 5/21/2022
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
I am willing to Travel.
I need a job as soon as possible.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
I need a job as soon as possible.
I am willing to work overseas.
I prefer temp jobs.
I prefer permanent jobs.
Certifications
API 510
API 570
API 653
ASNT-TC-IA, UT, MT, PT, RT, ET, VT Level II
API 570
API 653
ASNT-TC-IA, UT, MT, PT, RT, ET, VT Level II
Education
The Ocean Corporation, Houston TX
Nondestructive Testing and Inspection
ASNT-TC-IA, UT, MT, PT, RT, ET, VT Level II
Institute of Management and Technology, Enugu Nigeria
Bachelor's degree in Mechanical Engineering
Nondestructive Testing and Inspection
ASNT-TC-IA, UT, MT, PT, RT, ET, VT Level II
Institute of Management and Technology, Enugu Nigeria
Bachelor's degree in Mechanical Engineering
Experience
PTS Advance, Houston TX 1/2022 Present
API 510/570/653 Inspector, Turnaround Contract
Performed internal and external inspection on pressure vessels, piping, exchangers, filters, drums, tower/columns, and aboveground tanks and submit written reports of findings.
Write Non-Conformance reports and monitor corrective actions.
Interpretation of P&IDs, isometric drawings, and sketch of isometric drawing in the field.
Witnessed hydro test and maintain detail documentation.
Witnessed bolt ups and verified torque of flanged connection.
Reviewed initial turnover packages prior to work starting to ensure all supporting documents such as WPS, WPQ and ITP support the scope of work.
Verify ITP has been approved by client Mechanical Integrity representative before start of work.
Review final inspection turnover documents and contractor job packages for compliance with applicable code.
Provide inspection frequency, type, requirement, repair, recommendations, and approved repairs as well as performs visual inspection of completed repair work.
Coordinate NDE activities and verify accuracy of reports.
Monitor contractor quality programs.
Review material specifications as part of the completed contractor turnover package.
Review welding procedures and verify compliance.
Iris NDT, Houston TX 10/2021 3/2022
API 510/570/653 Inspector, Turnaround Contract
Performed internal and external inspection on pressure vessels, piping, exchangers, filters, drums, tower/columns, and aboveground tanks to maintain the mechanical integrity.
Write detailed inspection reports and maintains documentation of inspection activities.
Interpretation of P&IDs, isometric drawings, and sketch of isometric drawing in the field.
Witnessed hydro test on pressure vessels and piping and maintain detail documentation.
Verified bolt up on pressure vessels and piping connection.
Reviewed and managed the inspections due for assigned unit or units in compliance with Global Mechanical Integrity Manual (GMIM) / Global Mechanical Integrity Safety Standard (GMISS).
Identified potential damaged mechanisms and make recommendations.
Ensured that the inspections performed are accurate and comply with code requirement.
Recommended and approved repairs as well as performs visual inspection of completed repair work.
Provided oversight, interpretation, auditing, and approval of NDE to be performed.
Provided inspection frequency, type, requirement, repair, and recommendations.
Maintained a safe, secure, and healthy environment by adhering to company/customer safety standards and practices and to legal regulations, alerting others regarding potentials hazards or concern.
Assisted in scheduling activities related to inspection.
Protect LLC, Houston TX 06/2021 10/2021
API Inspector
Performed internal and external inspection on pressure vessels, piping, exchangers, filters, drums, tower/columns, and aboveground tanks to maintain the mechanical integrity.
Wrote detailed inspection reports and maintains documentation of inspection activities.
Interpretation of isometric drawings and sketch of isometric drawing in the field.
Witnessed hydro test on pressure vessels and piping and maintain detail documentation.
Verified bolt up on pressure vessels and piping connection.
Reviews and manages the inspections due for assigned unit or units in compliance with Global Mechanical Integrity Manual (GMIM) / Global Mechanical Integrity Safety Standard (GMISS).
Reviews and manages the list of non-conformances for assigned unit or units.
Performed risk analysis and manages inspection plans using RBMI software.
Participates in unit day to day maintenance by supplying inspection scopes along with repair scopes.
Participates in unit short downs by supplying inspection scopes along with repair scopes.
Provides inspection frequency, type, requirement, repair, and recommendations.
Maintains a safe, secure, and healthy environment by adhering to company/customer safety standards and practices and to legal regulations, alerting others regarding potentials hazards or concern.
Identified potential damaged mechanisms and make recommendations.
Ensure that the inspections performed are accurate and comply with code requirement.
Provide oversight, interpretation, auditing, and approval of NDE to be performed.
Creates, reviews, and approves repair plans to correct non-conformances.
Ensure all stationary equipment is safe and reliable to operate.
Ensure all fixed equipment mechanical integrity activities meet or exceed the corporate, local, and regulatory requirements.
HMT, Pasadena TX 09/2020 04/2021
API 510/570/653 Inspector
Perform visual inspection on several huge piping projects and prepare detail inspection report.
Recommends and approves repairs as well as performs visual inspection of completed repair work.
Write detailed inspection reports and maintains documentation of inspection activities.
Performs necessary filling of customer and company job related forms and paperwork.
Performed visual inspection on insulated piping and prepare detail inspection report.
Accept and review all NDE results.
Identify potential damage mechanisms
Ensure that the inspections performed are accurate and comply with code requirement.
Performed internal and external inspection on vessels and tanks to maintain the mechanical integrity.
Performed seal inspection of Aboveground Storage Tanks.
Performed routine external and UT in-service inspection of Aboveground Storage Tanks.
Performed in-service and out of service inspection of Aboveground Storage Tanks.
Performed settlement survey of Aboveground Storage tanks.
Performed in-service inspection on Aboveground Storage Tank and prepare detail inspection report.
Performed inspection on pressure vessels and prepare detail inspection report.
Interpretation of P&IDs, Isometric drawings and sketch of Isometric drawing in the field.
Performed post repair on Aboveground Storage Tank.
Rosen USA, Houston TX 04/2018 09/2020
Field Inspector
Performs internal and external inspections on tanks and vessels to maintain the mechanical integrity.
Recommends and approves repairs as well as performs visual inspection of completed repair work.
Wrote detailed inspection reports and maintains documentation of inspection activities.
Performs necessary filling of customer and company job related forms and paperwork.
Assists in scheduling activities related to inspection.
Maintains a safe, secure, and healthy environment by adhering to company/customer safety standards and practices and to legal regulations, alerting others regarding potentials hazards or concern.
Identify potential damage mechanisms.
Provide oversight, interpretation, auditing, and approval of NDE to be performed.
Ensure that the inspections performed are meeting the inspection requirements for detection.
Organize, prioritize, and execute a peak workload.
Perform seal inspection of Aboveground Storage Tanks.
Perform routine external and UT in-service inspection of Aboveground Storage Tanks.
Perform out of service inspection of Aboveground Storage Tanks.
Perform settlement survey of Aboveground Storage tanks.
Perform API 570 visual inspection on piping and prepare detail inspection report.
Perform API 510 inspection on pressure vessels and prepare detail inspection report.
Diamond WTG Engineering and Services Inc, Santa Teresa, NM 01/2017 03/2018
NDT Technician / Lead Technician
Conducts ultrasonic testing on wind turbine.
Conduct UT thickness inspection on fiberglass composite.
Marks defective areas on fiberglass composite and prepares report of test findings.
Perform internal and external inspection to detect shear web defect on wind turbine.
Reviews work orders, test procedure, and acceptance criteria to determine test specifications.
Compiles and submits completed inspection reports in timely manner.
Conducts inspection at scheduled intervals to maintain the mechanical integrity of the equipment.
Apply OSHA safety procedures on all customer facilities.
Compile and submits daily and inspection reports as well as inter-office communication.
Maintains a positive relationship between client and promotes a positive attitude towards coworkers.
Carbon Steel Inspection, Houston, TX 9/2016 11/2016
NDT Technician (Turnaround)
Calibrates and set up Eddy Current equipment.
Inspect stainless steel tube for conformance to customers specifications using eddy current
Select sample tube with known defects passes it through coil to test equipment settings.
Periodically cycles sample tubes through coil to verify standard operation of equipment.
Records information, like control settings as well as number of tubes tested, on inspection report.
Observe pattern on Crt screen to make sure that equipment signals reflect known defect on sample tube
Aeolus Energy Solutions, Lexington Park, MD 11/2015 08/2016
NDT Technician Level II UT, Contract
Perform ultrasonic testing on wind blade turbine to identify delamination, and other indications
Perform UT thickness inspection on fiberglass composite.
Marks defective areas on fiberglass composite and prepares report of test findings.
Perform UT inspection and visual inspection on wind turbine.
Reviews work orders, test procedure, and acceptance criteria to determine test specifications
Calibrates ultrasonic test equipment to required standards and settings.
Compiles and submits completed inspection reports in a timely manner.
Applying OSHA safety procedures on all customer facilities.
Climb up and down 320 ft wind turbine to perform internal and external inspection and repairs.
Baker Hughes Incorporated, Houston TX 07/2013 07/2014
Offshore Field Mechanic/Equipment Operator
Pigging a flow line. Offshore (Gulf of Mexico)
Umbilical services. (Offshore and Onshore)
Perform high pressure pumping, leak test and hydro testing. Offshore (Gulf of Mexico)
Well commissioning and decommissioning.
Operate and repair of high-pressure pumps.
Periodically review rotating equipment thermodynamics and mechanical performance.
API 510/570/653 Inspector, Turnaround Contract
Performed internal and external inspection on pressure vessels, piping, exchangers, filters, drums, tower/columns, and aboveground tanks and submit written reports of findings.
Write Non-Conformance reports and monitor corrective actions.
Interpretation of P&IDs, isometric drawings, and sketch of isometric drawing in the field.
Witnessed hydro test and maintain detail documentation.
Witnessed bolt ups and verified torque of flanged connection.
Reviewed initial turnover packages prior to work starting to ensure all supporting documents such as WPS, WPQ and ITP support the scope of work.
Verify ITP has been approved by client Mechanical Integrity representative before start of work.
Review final inspection turnover documents and contractor job packages for compliance with applicable code.
Provide inspection frequency, type, requirement, repair, recommendations, and approved repairs as well as performs visual inspection of completed repair work.
Coordinate NDE activities and verify accuracy of reports.
Monitor contractor quality programs.
Review material specifications as part of the completed contractor turnover package.
Review welding procedures and verify compliance.
Iris NDT, Houston TX 10/2021 3/2022
API 510/570/653 Inspector, Turnaround Contract
Performed internal and external inspection on pressure vessels, piping, exchangers, filters, drums, tower/columns, and aboveground tanks to maintain the mechanical integrity.
Write detailed inspection reports and maintains documentation of inspection activities.
Interpretation of P&IDs, isometric drawings, and sketch of isometric drawing in the field.
Witnessed hydro test on pressure vessels and piping and maintain detail documentation.
Verified bolt up on pressure vessels and piping connection.
Reviewed and managed the inspections due for assigned unit or units in compliance with Global Mechanical Integrity Manual (GMIM) / Global Mechanical Integrity Safety Standard (GMISS).
Identified potential damaged mechanisms and make recommendations.
Ensured that the inspections performed are accurate and comply with code requirement.
Recommended and approved repairs as well as performs visual inspection of completed repair work.
Provided oversight, interpretation, auditing, and approval of NDE to be performed.
Provided inspection frequency, type, requirement, repair, and recommendations.
Maintained a safe, secure, and healthy environment by adhering to company/customer safety standards and practices and to legal regulations, alerting others regarding potentials hazards or concern.
Assisted in scheduling activities related to inspection.
Protect LLC, Houston TX 06/2021 10/2021
API Inspector
Performed internal and external inspection on pressure vessels, piping, exchangers, filters, drums, tower/columns, and aboveground tanks to maintain the mechanical integrity.
Wrote detailed inspection reports and maintains documentation of inspection activities.
Interpretation of isometric drawings and sketch of isometric drawing in the field.
Witnessed hydro test on pressure vessels and piping and maintain detail documentation.
Verified bolt up on pressure vessels and piping connection.
Reviews and manages the inspections due for assigned unit or units in compliance with Global Mechanical Integrity Manual (GMIM) / Global Mechanical Integrity Safety Standard (GMISS).
Reviews and manages the list of non-conformances for assigned unit or units.
Performed risk analysis and manages inspection plans using RBMI software.
Participates in unit day to day maintenance by supplying inspection scopes along with repair scopes.
Participates in unit short downs by supplying inspection scopes along with repair scopes.
Provides inspection frequency, type, requirement, repair, and recommendations.
Maintains a safe, secure, and healthy environment by adhering to company/customer safety standards and practices and to legal regulations, alerting others regarding potentials hazards or concern.
Identified potential damaged mechanisms and make recommendations.
Ensure that the inspections performed are accurate and comply with code requirement.
Provide oversight, interpretation, auditing, and approval of NDE to be performed.
Creates, reviews, and approves repair plans to correct non-conformances.
Ensure all stationary equipment is safe and reliable to operate.
Ensure all fixed equipment mechanical integrity activities meet or exceed the corporate, local, and regulatory requirements.
HMT, Pasadena TX 09/2020 04/2021
API 510/570/653 Inspector
Perform visual inspection on several huge piping projects and prepare detail inspection report.
Recommends and approves repairs as well as performs visual inspection of completed repair work.
Write detailed inspection reports and maintains documentation of inspection activities.
Performs necessary filling of customer and company job related forms and paperwork.
Performed visual inspection on insulated piping and prepare detail inspection report.
Accept and review all NDE results.
Identify potential damage mechanisms
Ensure that the inspections performed are accurate and comply with code requirement.
Performed internal and external inspection on vessels and tanks to maintain the mechanical integrity.
Performed seal inspection of Aboveground Storage Tanks.
Performed routine external and UT in-service inspection of Aboveground Storage Tanks.
Performed in-service and out of service inspection of Aboveground Storage Tanks.
Performed settlement survey of Aboveground Storage tanks.
Performed in-service inspection on Aboveground Storage Tank and prepare detail inspection report.
Performed inspection on pressure vessels and prepare detail inspection report.
Interpretation of P&IDs, Isometric drawings and sketch of Isometric drawing in the field.
Performed post repair on Aboveground Storage Tank.
Rosen USA, Houston TX 04/2018 09/2020
Field Inspector
Performs internal and external inspections on tanks and vessels to maintain the mechanical integrity.
Recommends and approves repairs as well as performs visual inspection of completed repair work.
Wrote detailed inspection reports and maintains documentation of inspection activities.
Performs necessary filling of customer and company job related forms and paperwork.
Assists in scheduling activities related to inspection.
Maintains a safe, secure, and healthy environment by adhering to company/customer safety standards and practices and to legal regulations, alerting others regarding potentials hazards or concern.
Identify potential damage mechanisms.
Provide oversight, interpretation, auditing, and approval of NDE to be performed.
Ensure that the inspections performed are meeting the inspection requirements for detection.
Organize, prioritize, and execute a peak workload.
Perform seal inspection of Aboveground Storage Tanks.
Perform routine external and UT in-service inspection of Aboveground Storage Tanks.
Perform out of service inspection of Aboveground Storage Tanks.
Perform settlement survey of Aboveground Storage tanks.
Perform API 570 visual inspection on piping and prepare detail inspection report.
Perform API 510 inspection on pressure vessels and prepare detail inspection report.
Diamond WTG Engineering and Services Inc, Santa Teresa, NM 01/2017 03/2018
NDT Technician / Lead Technician
Conducts ultrasonic testing on wind turbine.
Conduct UT thickness inspection on fiberglass composite.
Marks defective areas on fiberglass composite and prepares report of test findings.
Perform internal and external inspection to detect shear web defect on wind turbine.
Reviews work orders, test procedure, and acceptance criteria to determine test specifications.
Compiles and submits completed inspection reports in timely manner.
Conducts inspection at scheduled intervals to maintain the mechanical integrity of the equipment.
Apply OSHA safety procedures on all customer facilities.
Compile and submits daily and inspection reports as well as inter-office communication.
Maintains a positive relationship between client and promotes a positive attitude towards coworkers.
Carbon Steel Inspection, Houston, TX 9/2016 11/2016
NDT Technician (Turnaround)
Calibrates and set up Eddy Current equipment.
Inspect stainless steel tube for conformance to customers specifications using eddy current
Select sample tube with known defects passes it through coil to test equipment settings.
Periodically cycles sample tubes through coil to verify standard operation of equipment.
Records information, like control settings as well as number of tubes tested, on inspection report.
Observe pattern on Crt screen to make sure that equipment signals reflect known defect on sample tube
Aeolus Energy Solutions, Lexington Park, MD 11/2015 08/2016
NDT Technician Level II UT, Contract
Perform ultrasonic testing on wind blade turbine to identify delamination, and other indications
Perform UT thickness inspection on fiberglass composite.
Marks defective areas on fiberglass composite and prepares report of test findings.
Perform UT inspection and visual inspection on wind turbine.
Reviews work orders, test procedure, and acceptance criteria to determine test specifications
Calibrates ultrasonic test equipment to required standards and settings.
Compiles and submits completed inspection reports in a timely manner.
Applying OSHA safety procedures on all customer facilities.
Climb up and down 320 ft wind turbine to perform internal and external inspection and repairs.
Baker Hughes Incorporated, Houston TX 07/2013 07/2014
Offshore Field Mechanic/Equipment Operator
Pigging a flow line. Offshore (Gulf of Mexico)
Umbilical services. (Offshore and Onshore)
Perform high pressure pumping, leak test and hydro testing. Offshore (Gulf of Mexico)
Well commissioning and decommissioning.
Operate and repair of high-pressure pumps.
Periodically review rotating equipment thermodynamics and mechanical performance.
