PAUT-ToFD-AUT Operator and Supervisor
NDT.org Member Since: 2022
Added: 3/10/2022
Last Updated: 3/10/2022
Last Updated: 3/10/2022
To see contact info and over 12,000 resumes Get a Level II Subscription or Call (415) 796-6446.
State:
TX Texas
Country:
United States
Status:
I am willing to Travel.
I am on a job and will finish soon.
Currently working but always looking.
I need a job as soon as possible.
I am willing to work overseas.
I am on a job and will finish soon.
Currently working but always looking.
I need a job as soon as possible.
I am willing to work overseas.
Certifications
EN473 UT II, Phased Array, and TOFD, VT,
Shaw Pipeline SCR PAUT & Tofd Advanced Sizing on Risers
PCN UT II (Expired),
NACE CIP 1
ASNT Level II UT, RT, ET, MT, PT, VT,
ASNT UT Level 3 (SNT-TC-1A previously Held)
Offshore Survival, Bosiet, Rig pass, Safe Gulf, Huet, TWIC
Shaw Pipeline SCR PAUT & Tofd Advanced Sizing on Risers
PCN UT II (Expired),
NACE CIP 1
ASNT Level II UT, RT, ET, MT, PT, VT,
ASNT UT Level 3 (SNT-TC-1A previously Held)
Offshore Survival, Bosiet, Rig pass, Safe Gulf, Huet, TWIC
Education
Nace CIP 1 2020 Shaw pipeline Services SCR Course 2014
A-Star Training Singapore 2013
PCN Level II UT
Zetec (RD/Tech) 2011
Zircon Training and operation of Ultravision 2d/ 3d software
IUOE Training Center
Shaw PA & Tofd AUT Training 2010
Olympus OmniScan & TOFD Training
Weld Star MP Training
Weld Star PA Training
Advanced Sizing Discussion
Applus RTD /JanX 2008
MUT & Paulis PA128 Rotoscan (PAUT & TOFD) Training,
Paulis Portable Tofd Training.
Spartan College of Aeronautics 2005-2007
A.A.S. Quality Control and Non-Destructive Testing
Methods: UT, RT, ET, MT, PT
Presidents Honor Roll 4.0 GPA
A-Star Training Singapore 2013
PCN Level II UT
Zetec (RD/Tech) 2011
Zircon Training and operation of Ultravision 2d/ 3d software
IUOE Training Center
Shaw PA & Tofd AUT Training 2010
Olympus OmniScan & TOFD Training
Weld Star MP Training
Weld Star PA Training
Advanced Sizing Discussion
Applus RTD /JanX 2008
MUT & Paulis PA128 Rotoscan (PAUT & TOFD) Training,
Paulis Portable Tofd Training.
Spartan College of Aeronautics 2005-2007
A.A.S. Quality Control and Non-Destructive Testing
Methods: UT, RT, ET, MT, PT
Presidents Honor Roll 4.0 GPA
Experience
Shaw pipeline Services Tulsa Office 2018-2022
Mainline Operator/AUT (PAUT) Union Trainer
ITI International LLC 2018-2018
3rd Party Pipe Mill Night Lead / NDE Inspector
ITI International / Candor Inspection Solutions 2017-2018
AUT Auditor Gas Company Rep / 3rd Party
UT Quality 2017-2017
AUT (PAUT& ToFD) Operator Mainline/Repairs
Acuren 2016-2017
AUT/PAUT & TOFD Senior Technician (GE Weldstar)
Stanley Pipeline Inspection 2015-2016
AUT/PAUT & TOFD Senior Operator, PipeWizard & OmniScan
Shaw Pipeline Services 2014-2015
AUT/PAUT &TOFD SCR Operator and Supervisor
Candor Inspection Solutions 2013-2014
AUT/PAUT & ToFD Auditor Onshore/Offshore for Williams
WeldSonix 2012-2013
Supervisor AUT/PAUT and RT on Keystone XL Spread 1, 200mi 14 crews (Weldstar Equipment)
Ecoglobal SRL (AUT Coordinator/Supervisor) 2010-2012
Supervise Multiple AUT/PAUT Projects Sectorial Scan & Zone Discrimination
Write and review PAUT procedures for Onshore and Offshore applications
PAUT ASME B31.3 Code case Qualification of Zetec equipment 1st in industry
Equipment: Omni scan, Focus LT, Zetec Zircon, Pipe Wizard V2/V4 Train Personnel for Zone Discrimination and Sectorial Methodology with Tomoview
ASNT Level III 3rd party Certification (now Expired)
Shaw Pipeline Services (Supervisor/Mainline PA/AUT Operator) 2009-2010
ASNT Level II UT SW, SPS AUT/PAUT Scanner, MT ASNT Level II
WeldSonix (Mainline AUT Operator) 2009
ASNT Level II UT SW (El Paso Certified), GE WeldStar MP/PAUT
ASNT Level II MT (El Paso Certified)
Applus RTD (Mainline AUT Operator) 2008-2009
ASNT Level II UT SW & Level II MT, Olympus OmniScan Operator
RTD Rotoscan PA / MP, MUT and Manual TOFD
Shaw Pipeline Services (Scanner Tech) 2007
Spool Base, and Offshore work, Manual UT, Offshore Survival
SouthWest United (Calibration Lab Manager) 2006-2007
Oversee all Coating Equipment and NDT instruments
Calibrate and maintain all Inspection Equipment
Perform ET and MT/PT testing
Visual and Mechanical inspection of Aerospace parts
Analyze Mil Specs and FAA guidelines
Valmont Industries 2006
Manual UT Shear wave, to AWS D1.1
Weber Aircraft (Destructive Testing and NDT) 2003-2004
Testing Lab Lead Tech, Static, Dynamic and Cycle testing
Load, Tensile, Environmental Testing, PT Testing of Aerospace parts
Travis Pattern and Foundry 2002-2003 Aluminum Foundry, Casting, Grinding, Bandsaw Operator, Quality Control, Forklift Driver
Mainline Operator/AUT (PAUT) Union Trainer
ITI International LLC 2018-2018
3rd Party Pipe Mill Night Lead / NDE Inspector
ITI International / Candor Inspection Solutions 2017-2018
AUT Auditor Gas Company Rep / 3rd Party
UT Quality 2017-2017
AUT (PAUT& ToFD) Operator Mainline/Repairs
Acuren 2016-2017
AUT/PAUT & TOFD Senior Technician (GE Weldstar)
Stanley Pipeline Inspection 2015-2016
AUT/PAUT & TOFD Senior Operator, PipeWizard & OmniScan
Shaw Pipeline Services 2014-2015
AUT/PAUT &TOFD SCR Operator and Supervisor
Candor Inspection Solutions 2013-2014
AUT/PAUT & ToFD Auditor Onshore/Offshore for Williams
WeldSonix 2012-2013
Supervisor AUT/PAUT and RT on Keystone XL Spread 1, 200mi 14 crews (Weldstar Equipment)
Ecoglobal SRL (AUT Coordinator/Supervisor) 2010-2012
Supervise Multiple AUT/PAUT Projects Sectorial Scan & Zone Discrimination
Write and review PAUT procedures for Onshore and Offshore applications
PAUT ASME B31.3 Code case Qualification of Zetec equipment 1st in industry
Equipment: Omni scan, Focus LT, Zetec Zircon, Pipe Wizard V2/V4 Train Personnel for Zone Discrimination and Sectorial Methodology with Tomoview
ASNT Level III 3rd party Certification (now Expired)
Shaw Pipeline Services (Supervisor/Mainline PA/AUT Operator) 2009-2010
ASNT Level II UT SW, SPS AUT/PAUT Scanner, MT ASNT Level II
WeldSonix (Mainline AUT Operator) 2009
ASNT Level II UT SW (El Paso Certified), GE WeldStar MP/PAUT
ASNT Level II MT (El Paso Certified)
Applus RTD (Mainline AUT Operator) 2008-2009
ASNT Level II UT SW & Level II MT, Olympus OmniScan Operator
RTD Rotoscan PA / MP, MUT and Manual TOFD
Shaw Pipeline Services (Scanner Tech) 2007
Spool Base, and Offshore work, Manual UT, Offshore Survival
SouthWest United (Calibration Lab Manager) 2006-2007
Oversee all Coating Equipment and NDT instruments
Calibrate and maintain all Inspection Equipment
Perform ET and MT/PT testing
Visual and Mechanical inspection of Aerospace parts
Analyze Mil Specs and FAA guidelines
Valmont Industries 2006
Manual UT Shear wave, to AWS D1.1
Weber Aircraft (Destructive Testing and NDT) 2003-2004
Testing Lab Lead Tech, Static, Dynamic and Cycle testing
Load, Tensile, Environmental Testing, PT Testing of Aerospace parts
Travis Pattern and Foundry 2002-2003 Aluminum Foundry, Casting, Grinding, Bandsaw Operator, Quality Control, Forklift Driver
Comments
Over the years I've Held many roles, from Technician to Operator, Supervisor, Auditor, Gas Company Represetative, NDT Coordinator. But staying Fresh on the Tools beig used is always important in NDT.
I Have a Stable Home Life, With No Attendance Issues, Can Travel Short Term or Long Term. Can Learn new equipment with ease and adapt to new procedures.
My Leadership and Problem Solving Skills allow me to be Self Sufficient in the field using Forward Thinking to solve problems on site. Building repor with the Client and on site management has never been a problem for me.
I Have a Stable Home Life, With No Attendance Issues, Can Travel Short Term or Long Term. Can Learn new equipment with ease and adapt to new procedures.
My Leadership and Problem Solving Skills allow me to be Self Sufficient in the field using Forward Thinking to solve problems on site. Building repor with the Client and on site management has never been a problem for me.
