PROFESSIONAL CERTIFICATE ATTENDANCES

„` Welding Inspector [WI 3.1] PCN Level 2
„` Ultrasonic Testing [UT 3.1, 3.2] PCN Level 2
„` Magnetic Particle Testing PCN Level 2
„` Penetrant Testing PCN Level 2
„` Radiographic Interpretation PCN Level 2
„` Eddy Current Testing CSWIP Level 2
„` Abseiler (Rope Access) IRATA Level 1

SAFETY INDUCTION COURSE ATTEND

„` Safety Course Offshore [TSTC]
„` Combine Sea Survival, Fire Fighting, First Aid And Huet with EBS [MSTS]-[Refresher]
„` Confined Space Course [Niosh]
„` Basic Hydrogen Sulphide [H2S] (Competency) [BSTS]
„` Niosh Petronas Safety Passport [NPSP]

EDUCATIONAL BACKGROUND

2000 ¡V 2003 Diploma in Building Services Engineering - CGPA 3.34
[Politeknik Sultan Salahuddin Abdul Aziz Shah]

1997 ¡V 1998 Sijil Pelajaran Malaysia (SPM) - Grade 2 - 25 Aggregates

WORK EXPERIENCE

Year Company Position
Augusts 2007 ¡V Present

ESP RAT SDN. BHD.
Platform: CONOCO PHILLIPH , XJ 30-2 & NANHAI KAI TUO (FPSO) Republic Of China
Project : Top Side Structure Inspection & Reparation

Welding Inspector and NDT Inspector
(Rope Access Inspector)

Duties/Responsibility : -

Perform quality control related to function during fabrication and installation works carried out at offshore locations to verify compliance to client¡¦s specifications. This scope normally includes by not limited to the following: -

Top Side Structure Inspection

„X Carried out Visual inspection and supervise ultrasonic inspection on jacket legs, bracing jacket legs, deck legs, pipeline risers, derrick structure drilling, skim pile, flare boom and other related facility main structure.
„X Supervise Eddy Current inspection, MPI inspection and carried out visual inspection on monorails, lifting beam, pad eye, lifeboat davit structure and associated, crane pedestal, hooks, frame and other related crane.

Rope Access Reparation Work

„X Material inspection and verification that meets clients and purchase order requirements
„X Verification of valid WPS and qualified welders in accordance to ASME IX.
„X Assist in the review of welding and NDT procedures generated by client¡¦s specifications.
„X Welding inspection that includes joint preparation, fit-up and visual inspection after completion of welding.
„X Identify requirements for NDT¡¦s such as radiography, ultrasonic test, eddy current or other test to verify integrity of weldments.
„X Review and approved all radiographic test results.
„X Review and compile fabrication documents and issuance of completion reports.
„X Verified location for Tie- in Point, reviewed applicable joint and related WPS before project started
„X Prepare fit-up, visual report, welder performance and hydrotest report after end day work completion.
„X Monitoring activities and responds issue regarding code and regulation.
„X Plan, coordinate and supervise the inspection activities.
„X Verified location for Tie- in Point, reviewed applicable joint and related WPS before project started
„X Witnessed WQT, hydro test, and leak test.
„X Performed inspection for final task as a line checker and fill ¡Vup MCC form and punch list form Carried - out red line marking for modification.
„X Set-up and Prepared final QA/QC documentation as per Client Requirement.




WORK EXPERIENCE


Year Company Position
May 2007 ¡V Present

Petra Resources SDN. BHD.
Platform: SHELL F6 Offshore , Bintulu
Project : F6 Rejuvenation Project Major Maintenance ,
Hook - up, Commissioning & Construction

Acting Senior Welding Inspector and Welding Inspector


Duties/Responsibility : -

Perform quality control related to function during fabrication and installation works carried out at offshore locations to verify compliance to client¡¦s specifications. This scope normally includes by not limited to the following: -

„X Material inspection and verification that meets clients and purchase order requirements.
etc...materials involved GRE, Stainless Steels, Duplex Steel and Carbon Steel, Cooper Nickel.
„X Verification of valid WPS and qualified welders in accordance to ASME IX.
„X Assist in the review of welding and NDT procedures generated by client¡¦s specifications.
„X Welding inspection that includes joint preparation, fit-up and visual inspection after completion of welding.
„X Identify requirements for NDT¡¦s such as radiography, ultrasonic test or other test to verify integrity of weldments.
„X Review and approved all radiographic test results.
„X Review and compile fabrication documents and issuance of completion reports.
„X Witness on the hydro testing as per approved hydropack.
„X Verified location for Tie- in Point, reviewed applicable joint and related WPS before project started
„X Prepare fit-up, visual report, welder performance and hydrotest report after end day work completion.
„X Monitoring activities and responds issue regarding code and regulation.
„X Plan, coordinate and supervise the inspection activities.
„X Verified location for Tie- in Point, reviewed applicable joint and related WPS before project started
„X Witnessed WQT, hydro test, and leak test.
„X Performed inspection for final task as a line checker and fill ¡Vup MCC form and punch list form Carried - out red line marking for modification.
„X Performed inspection for Valve etc...ball valve, globe valve, gate valve, check valve, pressure safety valve.
„X Assist commissioning team to perform re ¡V instatement test before start-up gas line.
„X Set-up and Prepared final QA/QC documentation as per Client Requirement.







WORK EXPERIENCE
Year Company Position
May 2006 ¡V May 2007
[Oshore/Ofshore] Velosi [M] Sdn. Bhd.
[Sarawak Shell Bhd-Bintulu Integrated Facility] Engineering Inspector

Seconded/ (Client) to Sarawak Shell Berhad / Sabah Shell Petroleum Company (SSB / SSPC). Based in Bintulu Crude Oil Terminal (BCOT) Under EPK ¡V MTN Dept. ( EPA-PM-MESK3¡X MAINTENANCE )

Duties/Responsibility : -

„X To carry out daily / plan and shutdown Schedule for plant inspection on storage tanks, BSBM 1& 2 (Top side inspection/ maintenance), Pressure vessel, Heat exchanger, Boiler, Pipes rack, Pipelines, Tank and etc.
„X Monitor / Witness blasting / painting on tanks Maintenance , vessel, piping
and etc. (Inspect for pre- maintenance / after maintenance).
„X To perform MT /PT / UT Wall thickness gouging on plant equipment during inspection. Checked corrosion (For internal and external).
„X Witnessing WPS and WPQT as per approved welding standard and codes & hydrostatic Quarterly Pressure test & hardness test
„X Performing material inspection, identification and verification and dimensional check of sub & complete assemblies of fabricated items to ensure compliance to approved drawing & specification
„X Ensuring that welders are using correct approved and qualified welding procedure.
„X Witness all integrity test and hydrostatic Quarterly Pressure test
„X Monitor all welding activities before, during & after such as post weld inspection in process welding surveillance and verification of post weld heat treatment.
„X Performing NDT Testing such as MPI and DPI on the fabricated structures/spool pipes and supervising cutting activities as well inspecting joints fit-up and welding.
„X Verifying all structural and piping ship loose materials and ensure that they are properly packed prior to loading.
„X Monitored/ witnessing BSBM-1/BSBM-2 offshore (Bintulu) annual top side inspection/maintenance , pre/after BSBM overhaul inspection, Sub sea hose/Floating hose (mainline) stringing and hose change-out.
„X Witness hydrostatic Quarterly Pressure test on offshore BSBM-1 & 2
„X Performed NDE testing (DPI MPI and vacuum Box Testing) and reviewed RT films to ensure compliance of the project requirement and company approved procedure.
„X To ensure that NDT equipment in your custody is utilized, maintained and stored efficiently and properly including updating any necessary calibrations.
„X Leased / coordination with client and sub-contractor regarding Inspection and NDT, activity before preferment boiler and piping.
„X Compile inspection report and punch list of outstanding items.

Reference :
1. MR. Dana Dugat ( EPA-PM ¡VMESK23) Maintenance (Sarawak Shell Bhd)
( onshore) supervisor ( CSR) Tel: 086-852209
2. MR. Jinmin Bin Albat( EPA-PM ¡VMESK3)Maintenance (Sarawak Shell Bhd)
BSBM-1 & 2( offshore) supervisor ( CSR) Tel: 086-852209

„X Reviewing the quality control and quality assurance aspects related to inspection of the company quality assurance manual, quality control manual and procedure, NDT work, undertaken and the like.
„X Interpretation of Weld Radiography and Visual / Dimensional Inspection
„X Prepare Inspection Report / Documentation.


WORK EXPERIENCE


Year Company Position
January 2005 ¡V May 2006
Tenaga Nasional Berhad [Remaco]
Welding/NDT Inspector

Duties/Responsibility : -

„X Carryout major/minor inspection activities at Gas Turbine, Stem Turbine, Boiler & Balance of Plant in all TNB Plan in Peninsula Malaysia.
„X Review document from supplier according to the code and standard and material to project specification.
„X Material verification during marking & cutting, prepare material verification report
„X Ensure the candidate follow WPS on required
„X Monitored closely on welding activities before, during & after to ensure the implementation of the approved procedure and safety rules has been applied.
„X Visual inspection after weld, check surface defects, distortion & dimension check after weld & prepare visual inspection report
„X Arrangement and monitor of turbine, pump, valve maintenance, RBI and all NDT method and requirement for RT, MPI, DPI to the project specification.
„X Assisted and provided information to QC Manager and QC Head on field construction revision and modifications.
„X To prepared all related reports and communicate to various departments.
„X To assist and cooperate with other NDT Inspector and other QC Inspector where required.
„X Prepared welder performance weekly and individual and perform any other duties as directed by superior / management from time to time.
„X Dimensional check of sub & complete assemblies of fabricated items to ensure compliance to approved drawing & specification
„X Visual Inspection and monitor the NDTman and the contracts worker
„X Performed NDE testing (DPI, MPI) and reviewed RT films to ensure compliance of the project requirement and company approved procedure.
„X Witness all welding & subsequent NDTs
„X Review & approve all RT films & reports
„X To ensure that NDT equipment in your custody is utilized, maintained and stored efficiently and properly including updating any necessary calibrations.
„X Leased / coordination with client and sub-contractor regarding Inspection and NDT, activity before preferment boiler and piping.


WORK EXPERIENCE

Year Company Position

1. January 1999 January 2000
2. Dec 2003 - Dec 2004
[offshore]

Haven engineering
Platform Talisman:
- Bunga Raya A [BRA],Bunga kekwa A [BKA]
[Hook Up& Commissioning Power Piping B 31.3]
QC Inspector


Duties/Responsibility : -

„X Carryout inspection activities.
„X Material Inspection & verification & traceable check prior to cut and fabricate
„X Review document from supplier according to the code and standard and met to project specification.
„X Fit-up inspection, dimension check, alignment, orientation and levelness check
„X Ensure the candidate follow WPS on required
„X Arrangement of all NDT method and requirement for RT, MPI, DPI to the project specification.
„X Assisted and provided information to QC Manager and QC Head on field construction revision and modifications.
„X To prepared all related reports and communicate to various departments.
„X To assist and cooperate with other NDT Inspector and other QC Inspector where required.
„X Prepared welder performance weekly and individual and perform any other duties as directed by superior / management from time to time.
„X Monitored closely on welding activities before, during & after to ensure the implementation of the approved procedure and safety rules has been applied.
„X Familiarize with the welding code like AWS D1.1, ASME section IX and clients specification
„X Performed NDE testing (DPI MPI and vacuum Box Testing) and reviewed RT films to ensure compliance of the project requirement and company approved procedure.
„X To ensure that NDT equipment in your custody is utilized, maintained and stored efficiently and properly including updating any necessary calibrations.
„X Leased / coordination with client and sub-contractor regarding Inspection and NDT, activity before preferment boiler and piping.

Skills

„X Proficient in Microsoft Office application such as Word, Power Point, Excel and Access
„X Able to work using Hevacomp v.15,
„X AutoCAD R.14
„X Familiar with International Codes of practice related to the design fabrication, with respect to welding inspection and QA/QC activity.
„X Possess excellent verbal and written communication skills,
„X Determine, dedicated, confident, and organized.
„X Strong analytical mind, initiative and able to work independently.
„X Able to interpret Engineering Drawing.


PERSONAL QUALITIES

Responsible, dedicated, high leadership quality, hardworking and willing
to learn new skills, detail in work, able to work in team or independently.